SUMK Model 3 Cabin Air Filter Replacement with Activated Carbon Compatible with Tesla Model 3 2017 2018 2019 2020 2021(2 pieces)

SUMK Model 3 Cabin Air Filter Replacement with Activated Carbon Compatible with Tesla Model 3 (2 Pieces) PACKAGE 1.Two pieces of main cabin air filter 2. One instruction paper INSTALLATION 1. Turn off the climate control system. 2.Move the front passenger seat fully rearwards and remove the front passenger floor mat. 3.Working from top-to-bottom, use

SUMK Model 3 Cabin Air Filter Replacement with Activated Carbon Compatible with Tesla Model 3 (2 Pieces)
PACKAGE
1.Two pieces of main cabin air filter
2. One instruction paper

INSTALLATION
1. Turn off the climate control system.
2.Move the front passenger seat fully rearwards and remove the front passenger floor mat.
3.Working from top-to-bottom, use a trim tool to carefully release the right side panel from the center console.
4.Use a clip pry tool to carefully release the push clips that secure the front passenger footwell cover to the instrument panel. Then, while supporting the footwell cover, disconnect the two electrical connectors and move the footwell cover aside.
5.Remove the T20 screw that secures the cabin filter cover to the heating, ventilation, and air conditioning (HVAC) module then release the cabin filter cover and move it aside. Note: If the HVAC module does not have a cabin filter cover, reinstall the trim panels and contact Tesla.
6.Fold the upper cabin filter’s tab upward and the lower filter’s tab downward.
7.Holding the tab on the upper cabin filter, pull the upper filter out from the HVAC module.
8.Holding the tab on the lower cabin filter, pull the lower filter upwards and then out from the HVAC module.
9.Ensuring that the arrows on both new filters face towards the rear of the vehicle, insert the lower cabin filter into the HVAC module and lower it into place. Then, insert the upper cabin filter above it.
10.Fold the tabs inward so that the cabin filter cover can be installed.
11.Install the cabin filter cover by engaging the lower cover tab then securing the T20 screw using. Tighten the screw to 1.2 Nm/0.89 ft-lbs.
12.Reconnect the two electrical connectors to the components in the front passenger footwell cover, then resecure the cover with the push clips.

Product Features

  • 【Customized design】The Air filters custom designed for Tesla model 3, It’s a nice replacement for Tesla Model 3 2017,2018,2019,2020,2021, it include 2 pieces and the size is correct, no worry to purchase
  • 【Super Functional 】Contains soda and carbon to generate fresh breeze air; Prevent pollen, industrial fallout, road dust, and other particles from entering the cabin through the vents; Enhanced HVAC performance, Recommended replacement every 12 months or 12,000 miles
  • 【Premium Material】The air filter is made of best quality material which is more breathable than others. Large filtration area ,high-capacity of Dust ,long lifespan
  • 【Easy Install and Remove】Easily install and easily removable, Follow the detailed instruction, will be very easy to install, it only take about 20 minutes to finished and get new fresh air in the car
  • 【Competitive Price and Services】We promise 100% satisfaction guarantee. Any question, please feel free to contact.