Galley Power LLC Low Voltage Battery Disconnect, 20A, 12V/24V Auto Detect

NEW wire color scheme with the same functions as our popular GPC-1005-RBlue wire-> Load+Black wire-> GNDRed wire-> Batt+ The GPC-1005B-R is a low voltage disconnect load switch. It prevents battery from over-discharge by disconnecting the attached load if the battery voltage drops below a predefined threshold. It reconnects the load when the battery is recharged.

NEW wire color scheme with the same functions as our popular GPC-1005-R
Blue wire-> Load+
Black wire-> GND
Red wire-> Batt+

The GPC-1005B-R is a low voltage disconnect load switch.
It prevents battery from over-discharge by disconnecting the attached load if the battery voltage drops below a predefined threshold.
It reconnects the load when the battery is recharged.

For install instructions and other details, please go to
http://www.galleypower.com/store/p9/Low_voltage_disconnect.html

Ten threshold options set by rotary selector
For 12V battery: 2, 9.3V; 3, 9.7V; 4, 10.1V; 5, 10.5V; 6, 10.9V; 7, 11.3V; 8, 11.7V; 9, 12.1V
For 24V battery: 2, 18.6V; 3, 19.4V; 4, 20.2V; 5, 21.0V; 6, 21.8V; 7, 22.6V; 8, 23.4V; 9, 24.2V
When switch is at 0, OFF: Disconnect power from the load. (When rotated to location 2~9, the switch will stay off until reconnect threshold is reached.)
When switch is at 1, ON: Connect power to the load if there is no pending fault. (When rotated to location 2~9, the switch will stay on until cutoff threshold is reached.)
Recessed rotary switch for better setting protection. See GPC-1005B-F for flushed rotary switch option with easy access.

Features
Ultra low pass-through impedance 4.5mΩ
Ultra low standby current 0.26mA in 12V mode and 0.65mA in 24V mode
Low normal operating current 3.5mA in 12V mode and 5.8mA in 24V mode
Automatic 12V/24V battery detection
Rotary switch provides 10 threshold options
Recessed rotary selector for enhanced setting protection
Max continuous current: 20A under full temperature range -40~130⁰F
Red-Green dual color LED display for battery monitoring and fault reporting
Low noise and low interference by solid-state switch
Comprehensive protections
Dimension: 80x40x20mm w/ flanged lid
1-year limited warranty.

Product Features

  • User selection for 8 disconnect threshold: 9.3~12.1V for 12V battery and 18.6~24.2V for 24V battery
  • 20A continuous current in full temperature range -40~130⁰F
  • 4.5mΩ ultra-low resistance: Less than 1/10 of power loss compared to competitors
  • Automatic 12V/24V battery detection
  • Low current consumption: down to 0.26mA with 12V battery