Easy & Quick Install of Wiring Harness

1. – Make a connection from the harness kit to the led light fixtures first (Red to Red, Black to Black).
2. – Connect the waterproof On/Off switch according to the wiring diagram.
3. – Then make a connection from the harness ring-terminals to the battery (Red to positive pole and Black to negative pole).
4. – Turn on or off the On-off switch to test the LED light bars.

Specification of wiring harness
Waterproof Rate：IP67
Power: 240W
Voltage:12V
Use Life: 6000H
Chromaticity: 6000K

NOTICES:
—Please match the wiring hardness with correct operating voltage！
–Professional installation is recommended. It is recommended to wrap all exposed wires with electrical tape to avoid short circuit, otherwise the wire bundle will melt or even catch fire.

Product Features

• 【USE RANGE& LARGE LOAD CAPACITY】: The wiring harnesses is suitable for all lights, its load capacity is up to 240W and is compatible with any LED, hidden or halogen off-road Light belt, work light or auxiliary light.
• 【RICH EQUIPPED & LINE LEUGHT】: The head of the wiring harnesses’ main electrical connection is 6.3mm with circlip. Switch control line: 3 meters. Switch line: 1 meter. the wiring harnesses is 2 meters. The relay to the work light line is 3 meters, to the battery is 0.5 meter.
• 【SAFETY】: The wiring harnesses kit with relay and high-current injection molding fuses, safe and secure in using. And it can take power directly by the storage battery, ensure that will not damage your original car power supply line.
• 【INSTALL】: Button switch with adhesive, can be installed in any part, simple and convenient for your work lights and cars.
• 【NOTE】: Professional installation is recommended. It is recommended to wrap all exposed wires with electrical tape to avoid short circuit, otherwise the wire bundle will melt or even catch fire.