2 Pack Universal Self Adhesive Auto Weather Stripping, Type B Rubber Draft Seal Strip for Car Door and Window, Engine Cover Soundproof-16.5 Ft Long X 51/100 Inch Wide X 1/5 Inch Thick Each Roll

If you drive an old vehicle, you’ll probably be all too familiar with how much noisier it has gotten due to old weatherstripping. Use new car weatherstrip will help block out wind noise, keep your car away from dust, keep moisture out and car inside temperature stable. Give your car a little makeover and replace

If you drive an old vehicle, you’ll probably be all too familiar with how much noisier it has gotten due to old weatherstripping. Use new car weatherstrip will help block out wind noise, keep your car away from dust, keep moisture out and car inside temperature stable. Give your car a little makeover and replace original weather strip on vehicle doors NOW!

Specifications:
Material: Epdm, Rubber
Shape: Type B
Size: 16.5 Ft Long X 51/100 Inch Wide X 1/5 Inch Thick each roll, 2 Rolls.

Feature:
1. Non-toxic, harmless, no special harmful odors.
2. Noise Reduction, waterproof, dustproof, soundproof, windproof.
3. High temperature resistance & cold resistance, prevent ultraviolet light. Ideally between 55 ° -104 ° F (13 ° -40 ° C). Such as, tape will not hold up to the desert heat of Arizona.

Installation Instruction:
1.Peel an old weatherstrip off.
2. Wipe the area off with a damp cloth and then a dry one.
2. Tear glue protection off(the red piece).
3. Follow contours to press it on the door, cut it as you need and close the door wait a bit (about 10 min).

Package Included:
2 Pack Car Weather Strip, 16.5 Feet each roll(Not included Adhesion Promoter in the package, recommend purchase it by yourself on Amazon.)

Note
1.Please measure the required length and confirm the width of the door gap before purchase! Otherwise, It’s still will have noise and air sound if not completely seal.
2.The strip is black and the red is the adhesive where you need peel that off.
3. Don’t recommend stick it on top of the old weatherstripping. Not to be in contact with food.
4.If you try taking it off after use you’ll need a scraper this stuff is hard to get rid of once it’s adhered.
5.It fit to any cars or truck! Such as for ford truck, chevy nova, mustang convertible and Toyota carolloa etc.

Product Features

  • 【Automotive Grade Extruded Rubber】Auto weatherstrip made of rubber. Environmentally friendly, non-toxic, weather resistant, wear-resistant and UV-resistant. It will seal the gap between car door, car body, car hood, bed rail etc, enhances the leakproofness of your car.
  • 【Upgraded Design】Universal shape B design used to replace other Type D, P, Z and O strip. But if you need, you can use it in combination with other type strips.
  • 【Extreme experience】The rubber weatherstrip is very sticky on the flat side, and adheres well for a long time to what ever it is applied to. Excellent soundproof compression set resistance for maximum service life and vibration absorption to reduce wind noise while driving on highway, thus made travelling a better aural experience.
  • 【Important】Extreme temperatures will result in poor adhesive performance. Apply this seal only if the air and surface temperature is between 55°- 104°F(13° – 40°C). If 45°-54°F(7° – 12°C) you can use a hair dryer and warm the tape, then apply. Note, you can use “Adhesion Promoter ” to added strength and durability if exposure to the weather elements!
  • 【Package & Size】2 Rolls in total 33 Ft. 16.5 Ft Long X 51/100 Inch Wide X 1/5 Inch Thick each Roll.